A3 8A USB 테스터 Type-C 전류 전압 모니터 고속 충전 PD 배터리 보조베터리 용량 DC 32V 암페어 측정기

55% Choice

해외배송 7~15일 ₩10,000↑ 무료배송

A3 8A USB 테스터 Type-C 전류 전압 모니터 고속 충전 PD 배터리 보조베터리 용량 DC 32V 암페어 측정기

55% 18,300원 35,795원

★ 4.8 · 리뷰 437개 · 1천개 판매

옵션 선택

수량

배송 안내

배송 소요: 7~15일 (해외배송)

무료배송

₩10,000이상 구매시 무료배송

7일 이내 교환/반품 가능

상품 하자: 무료 반품 + 전액 환불

단순 변심: 국제반품비 고객 부담

간편결제

후기작성 포토후기 1,000원 / 일반후기 500원

회원혜택 가입시 2,000원

Technical parameters:

Voltage measuring range: 4.00V ~ 32.00 V Resolution precision: 0.01 VCurrent measuring range: 0.000A ~ 8.000 A Resolution precision: 0.001A
Power cumulative range: 0 ~ 99999 WH Resolution precision: ±(0.8%+3 digit)
Capacity range:0 ~ 99999 mAH Resolution precision: ±(0.2%+1 digit)
Temperature：-10℃～100℃/0℉～200℉
Resolution precision:±3℃/±6℉
D+ Voltage : 0.000V ~ 2.99 V Resolution precision: 0.01 V
D- Voltage : 0.000V ~ 2.99 V Resolution precision: 0.01 V
Load impedance: 0 ~ 999 ohm
Resolution precision: 1 ohm
Power metering range: 0 ~ 224W
Timing maximum time: 99 H 59 M 59 S
Resolution precision: 1 S
Screen brightness setting:0-5 level
Auto screen off time:1-9mins
Display screen:1.44 Inch color LCD display
Quick charge recognition mode:QC2.0 QC3.0
Refresh rate:2HzTime to refresh: > 500 ms/time > 500 ms/times
Measurement rate: 0.5 times/sUse large equipment of the same metal manganese bronze sampling resistor(1.0 mm diameter metal manganese bronze material < 0.05R)
Product size: 74.5 x 32.3 x 10.0 mm
Since the power flow: < 0.003 A （ < 3mA ）
Working temperature: -10℃～100℃/0℉～200℉
Working humidity: 10 ~ 80 (no doubt)
The pressure of work: 80 ~ 106 kpa
Cumulative capacity range: 0-99999 mah precision: 0.001 Ah (New features or D+ D- Voltage )

Specifications:

Product model:A3
Item size:74.5* 32.3 * 10.0 mm
Net weight: 30g
Package weight: 38g
Color: Black

Instructions for using A3 tester

Application case: How to test the power of a PD charger at 100W

Required materials:
1. A charger that supports PD 100W power (self owned)
2. We need a PD trigger (capable of triggering PD 5V 9V 12V 20V voltage) (to be purchased separately)
3. An electronic load (at least 100W power electronic load) is required (to be purchased separately)
4. A tester is required (A3 tester has been purchased)
Operation method:
Insert the trigger into the PD charger, trigger the voltage to 20V, then insert the USB tester, connect the output terminal to a 150W power load, adjust the current to 5A, and test the 100W power
If 100W can be tested, it indicates that the charger is OK
If 100W cannot be tested, it indicates that the charger is NG.

Packing

1.A3 USB Tester x1